mve014030.gif
cutterbit002.jpg
mve014029.gif
mve014028.gif
mve014027.gif
mve014026.gif
mve014025.gif
logo150.jpg
Manhole Cutter Bits
mve014024.gif
Manhole cutter, manholes, paving, utilities, rotomilling, water valves, asphalt, trimming, manhole adjustments, adjusting water valves, water valve adjustments, manhole covers, manhole rings, concrete manholes, utility adjusters, utility adjustments, trimming around manholes, asphalt grinding, asphalt cutting, manhole restoration, collar adjustments, riser adjustments, manhole risers, sewer lines, sewer services, sewer chimneys, storm sewer, sanitary sewer, paving adjustments, grade adjustments, pavement cutters, pavement cutting, macadam cutters, carbide asphalt cutter, hole cutter, asphalt hole cutter, pavement hole cutter, utility risers, quik cut, quick cut, kwik cut, lid adjustment
mve014023.gif
© Copyright 2002 Mountain Valley Equipment. All rights reserved
web-design and hosting services:
A+
TECH
mve014022.gif
mve014021.gif
mve014020.gif
mve014019.gif
All MVE pricing information here for your convenience...
Manhole Cutter Bits pricing information here...
The cutter heads for the Stehr manhole cutter are available in diameters from 18" to 55". MVE stocks the most common sizes for immediate shipment. Custom sizes are available upon special order.
The cutter heads are designed and built with quality and durability in mind. The tooth spacing and angling has been developed over the last 8 years to provide optimum wear and performance. The use of carbide teeth, in lieu of diamonds, provides a much faster cut and an edge which facilitates a better asphalt patch. The teeth are easily replaceable and inexpensive, compared to diamonds. Due to the dry cut nature of carbide teeth, water for cooling is not needed. The flights provided along the barrel of the bit transport the cuttings from the hole. Due to the low speed of rotation of the cutter, this is accomplished almost dust free.
The hex shaft coupler gives a positive, slip free connection that performs under all extremes. Simplicity of this design allows for quick changes of bits when different diameters are needed, usually within a couple of minutes with trained personnel.
Cutter Heads for Manhole Cutter
SKF 950 B US-Versions
Concerning the wear on the average about 40 drillings with one set of teeth are possible. This depends on the material(asphalt, concrete, etc)
cuthead1.jpg
mve014018.gif
mve014017.gif
mve014016.gif
mve014015.gif
mve014014.jpg
mve014013.gif
mve014012.gif
mve014011.gif
mve014010.gif
sa403009.jpg
mve014009.gif
mve014008.gif
mve014007.gif
mve014006.gif
mve014005.jpg
mve014004.gif
mve014003.gif
mve014002.gif
mve014001.gif
Manhole Cutter FAQs here...
cutterweight.jpg
soil stabilizing soil stabilizers soil stabilization stabilizing stabilizers stabilization spreaders manhole cut manhole adjusting manhole cutting raising manholes manhole raising utility adjusting adjusting utilities coring asphalt cutting asphalt corer binding agent spreader binding agent spreading hydraulic coupler construction equipment excavation excavating reclamation reclaiming heavy construction